Plasma and LCD TV Wall Mounts

Sanus VMFL1b - $29

• The VisionMount VMFL1 is a low profile wall mount for small LCD TVs. Its powder-coated steel construction offers a sleek, high-tech look while providing strength and durability. TV is positioned just 0.5 inches from the wall for a clean, low profile appearance. VESA 75 and 100 mounting patterns fit virtually any 13 to 30 inch LCD TV or monitor up to 40 lbs.

Sanus MT25b - $79

• The VisionMount MT25 is a tilting wall mount for medium LCD TVs. Sanus Systems' Virtual Axis™ tilting system provides easy adjustment of viewing angle with just the gentle touch of a finger. Its powder-coated steel construction offers a sleek, high-tech look while providing strength and durability. TV is positioned less than 2. 5 inches from the wall for a clean, low profile appearance. Universal mounting pattern including VESA 400 x 200 fits virtually any 15 to 40 inch LCD TV or monitor up to 100 lbs.

Sanus VMF308-B1 - $199

• The VisionMount VMF308 Super Slim Full-Motion TV Wall Mount offers the best of both worlds - it places flat-panel TVs incredibly close to the wall, at a depth of just 1”, AND offers full-motion movement with up to 11” of extension. Features include a cable management guide that keeps loose cables organized (for a clean appearance without compromising TV movement); decorative covers that conceal the mounting hardware for a finished look; and a cutting-edge gliding system for effortless lateral TV shifting. The VMF308 is available in a sleek black finish and includes universal mountig brackets to fit nearly every flat-panel TV from 26”-47”.

Sanus MF202b - $69

• The VisionMount MF202 is a full-motion wall mount for 15" – 37" flat-panel TVs. Sanus Systems’ Virtual Axis 3D™ technology allows mount to tilt and swivel with fluid motion in every direction possible, while its low profile design places TV just 2" from the wall. Full motion allows easy viewing from multiple angles, and adjustment knob enables TV to move easily while maintaining tension for the perfect viewing angle. Keyholes on faceplate slide onto TV and into place for effortless bracket alignment and easy installation. Includes two VESA-compatible TV brackets: large bracket fits 200 x 200, 200 x 100 and 100 x 100; small bracket fits 100 x 100 and 75 x 75 to accommodate virtually any 15" – 37" LCD TV or monitor up to 60 lbs.

Sanus MF209b - $99

• The VisionMount MF209 is a full-motion wall mount for 15" – 37" flat-panel TVs. Sanus Systems’ Virtual Axis 3D™ technology allows mount to tilt, swivel, pan and extend with fluid motion in every direction possible up to 9" from the wall. Full motion allows easy viewing from multiple angles, and adjustment knob enables TV to move easily while maintaining tension for the perfect viewing angle. Keyholes on faceplate slide onto TV and into place for effortless bracket alignment and easy installation. Includes two VESA-compatible TV brackets: large bracket fits 200 x 200, 200 x 100 and 100 x 100; small bracket fits 100 x 100 and 75 x 75 to accommodate virtually any 15" – 37" LCD TV or monitor up to 60 lbs.

Sanus MF215b - $119

• The VisionMount MF215 is a full-motion wall mount for 15" – 37" flat-panel TVs. Sanus Systems’ Virtual Axis 3D™ technology allows mount to tilt, swivel, pan and extend with fluid motion in every direction possible up to 15" from the wall. Full motion allows easy viewing from multiple angles, and adjustment knob enables TV to move easily while maintaining tension for the perfect viewing angle. Keyholes on faceplate slide onto TV and into place for effortless bracket alignment and easy installation. Includes two VESA-compatible TV brackets: large bracket fits 200 x 200, 200 x 100 and 100 x 100; small bracket fits 100 x 100 and 75 x 75 to accommodate virtually any 15" – 37" LCD TV or monitor up to 60 lbs.

Sanus MF110b - $199

• The VisionMount MF110 is a full-motion wall mount for medium LCD TVs. Sanus Systems' Virtual Axis™ technology provides smooth tilting movement with the touch of a finger. Full motion allows mount to tilt, swivel, pan and extend up to 9.5" from the wall for easy viewing from multiple angles. Mount can be rotated ±6º after installation to ensure TV is perfectly level. Its extruded aluminum and solid heavy-gauge steel construction offer a sleek, high-tech look while providing strength and durability. VESA 100 and 200 mounting patterns fit virtually any 15" to 40" LCD TV or monitor up to 100 lbs.

Sanus VM400b - $229

• The VisionMount VM400 is a full motion wall mount for medium flat-panel TVs and can be used alone or with the LR1A recessed in-wall box. Sanus Systems' Virtual Axis™ tilting system provides effortless tilting movement with the touch of a finger. Full motion allows tilt, swivel, pan and extend motions up to 20 inches from the wall for easy viewing from multiple angles. Mount can be rotated ±6º after installation to ensure TV is perfectly level. Its extruded aluminum and solid heavy-gauge steel construction offers a sleek, high-tech look while providing strength and durability. VESA 100 and 200 mounting patterns fit virtually any 15 to 40 inch LCD TV or monitor up to 80 lbs.

Sanus VMF220-B1 - $299

• The VisionMount VMF220 full-motion mount for 26" – 46" TVs up to 100 lbs is engineered for the easiest installation possible. Our QuickConnect™ system allows the TV to snap onto the arm assembly with one easy movement and unlock with the push of a tab. The amazing FollowThru™ in-arm cable channel protects and completely conceals all cables without inhibiting movement, even through the elbow. Post-installation level adjustment allows the TV to “roll” up to 5º clockwise and counterclockwise to ensure it is perfectly level. Virtual Axis™ allows the TV to tilt up or down with the push of a finger, helping you reduce glare from lights or windows and find the perfect viewing angle. Universal mounting brackets.

Sanus VMPL50a - $99

• The VisionMount VMPL50A is a tilting wall mount for 32" – 60" flat-panel TVs. Sanus Systems’ Virtual Axis™ tilting system provides easy adjustment of viewing angle with just the touch of a finger. ProSet™ post-installation height and leveling adjustments ensure TVs are always perfectly positioned after hanging. Its solid heavy-gauge steel construction offers a sleek, high-tech look while providing strength and durability. Adjustable TV brackets offer lateral shift ability to allow perfect TV placement, even with off-center wall studs. TV is positioned just 1.8" from the wall for a clean, low-profile appearance. Universal mounting pattern fits virtually any LCD or plasma TV up to 150 lbs.

Sanus VMPL250b - $79

• The VisionMount VMPL250 is a low profile wall mount for large LCD and plasma TVs. Its solid heavy-gauge steel construction offers a sleek, high-tech look while providing strength and durability. TV brackets feature lateral shift ability to allow perfect TV placement, even with off-center wall studs. TV is positioned just 1.25 inches from the wall for a clean, low profile appearance. Universal mounting pattern fits virtually any 30 to 50 inch LCD and plasma TV up to 130 lbs.

Sanus VMP01b - $179

• The VisionMount VMPO1b is a pull-out cabinet mount for large LCD and plasma TVs. Its solid heavy-gauge powder-coated steel construction offers a sleek, high-tech look while providing strength and durability. Mount can be installed into most existing cabinets or into a variety of Sanus armoires, and rotates up to 30º. Sanus Systems’ SmoothGlide™ ball bearings allow this mount to be extended up to 5.5 inches with ease. VESA 100 and 200 mounting pattern fits virtually any 15 to 40 inch LCD or plasma TV or monitor up to 130 lbs. Also compatible with VMPL50, VMPL250, ML22 and MT25 mounts for additional flexibility in installation and viewing.

Sanus VMAA18b - $369

• The VisionMount VMAA18 is a full-motion wall mount for large flat-panel TVs. Sanus Systems' Virtual Axis™ tilting system provides effortless tilting movement with the touch of a finger. Full-motion allows tilt, swivel, pan, and extend motions up to 19.75 inches from the wall. Mount can be rotated ±6º after installation to ensure TV is perfectly level. Its extruded aluminum and solid heavy-gauge steel construction offers a sleek, high-tech look while providing strength and durability. Universal mounting pattern fits virtually any 30 to 50 inch LCD or plasma TV up to 130 lbs.

Sanus LF228-B1 - $499

• The VisionMount HDpro™ Series LF228 full-motion mount for 37" – 58" flat-panel TVs up to 130 lbs. was engineered with the custom installer in mind. Its pre-assembled interface and strong, ultra-light extruded aluminum wall plate allows the easiest and quickest installation possible. The QuickConnect™ system allows the mounting head to snap onto the arm assembly with one easy movement and unlock with the push of a button. ProSet™ post-installation height and leveling adjustments ensure TVs are always perfectly positioned after mounting. The LF228 arm assembly shifts left and right on the wall plate so the TV is always centered, even if wall studs are not. And the amazing FollowThru™ in-arm cable channel protects and completely conceals all cables without inhibiting movement, even through the elbow. Its strong extension arm allows large TVs to extend, retract, tilt and swivel up to 28" from wall with ease. Virtual Axis™ tilting technology allows effortless viewing angle adjustment with the touch of a finger. Universal mounting pattern fits virtually any 37" – 58" flat-panel TV up to 135 lbs.

Sanus VXF220-B1 - $599

• The VisionMount HDpro™ Series VXF220 is an all-weather wall mount that features a rust-resistant coating and stainless steel hardware that stands up to the elements, making this mount an ideal choice for indoor or outdoor use. It also features a pre-assembled interface and strong, ultra-light extruded aluminum wall plate for the quickest, easiest installation possible. The QuickConnect™ system allows the mounting head to snap onto the arm assembly with one easy movement and unlock with the push of a tab. ProSet™ post-installation height and leveling adjustments ensure the TV is always perfectly positioned after mounting. The VXF220 arm assembly shifts left and right on the wall plate for easy TV centering, even with off-center wall studs. And the amazing FollowThru™ in-arm cable channels conceal and protect cables, even through the elbow—without inhibiting movement. Strong dual arms allow even the largest TVs to extend, retract, tilt and swivel up to 20" from the wall with ease. Virtual Axis™ tilting technology allows effortless viewing angle adjustment with the push of a finger. Universal mounting brackets fit virtually any 42" – 75" flat-panel TV up to 200 lbs.

Sanus VLF210-B1 - $299

• The VisionMount VLF210 full-motion mount for 37" – 56" TVs up to 150 lbs is engineered for the easiest installation possible. Our QuickConnect™ system allows the TV to snap onto the arm assembly with one easy movement and unlock with the push of a tab. Post-installation level adjustment allows the TV to “roll” up to 5º clockwise and counterclockwise to ensure it is perfectly level, and lateral shift ability makes it easy to center the TV on the wall, even with off-center studs. An in-arm cable management channel protects and conceals cables the length of the arm for a clean appearance. Virtual Axis™ allows the TV to tilt up or down with the push of a finger, helping you reduce glare from lights or windows and find the perfect viewing angle.

Sanus VLF311-B1 - $299

• The VisionMount VLF311 Super Slim full-motion mount places 37" – 65" TVs just 1.25" from the wall, yet still allows full-motion capabilities. The VLF311 features fingertip tilt technology, which allows easy TV angle adjustments with the touch of a finger. Unlike other ultra-thin mounts on the market, the VLF311 also offers additional exclusive features that make it incredibly easy to use. With its cable management guide, the VLF311 keeps loose cables organized, creating a clean appearance without compromising TV movement. A cutting-edge gliding system makes ideal TV positioning effortless—TV can easily extend away from the wall and shift left or right on the wall plate. The VLF311 always has a finished appearance with a decorative cover that conceals assembly and mounting hardware.

Sanus VLF220-B1 - $379

• The VisionMount VLF220 full-motion mount for 37" – 56" TVs up to 130 lbs is engineered for the easiest installation possible. Our QuickConnect™ system allows the TV to snap onto the arm assembly with one easy movement and unlock with the push of a tab. The FollowThru™ in-arm channel conceals cables the entire length of the arm without inhibiting movement — even through the elbow. Post-installation level adjustment allows the TV to “roll” up to 5º clockwise and counterclockwise to ensure it is perfectly level, and lateral shift ability makes it easy to center the TV on the wall, even with off-center studs. Virtual Axis™ allows the TV to tilt up or down with the push of a finger, helping you reduce glare from lights or windows and find the perfect viewing angle.

Sanus LL22b - $189

• The VisionMount LL22 is a low-profile wall mount for 30" – 60" flat-panel TVs. Sanus System's unique ProSet™ post-installation height and leveling adjustments ensure TVs are always perfectly positioned after hanging. Quick-release tabs allow the TV to unlock instantly from the wall plate for easy installation, while its low-profile design places the TV nearly flush to the wall for a clean appearance. The innovative ClickStand™ feature holds the TV away from wall for easy cable installation and maintenance, then snaps shut to secure the TV to the wall plate. The LL22 features an open wall plate design that provides ample room for cable routing, and ClickFit™ technology allows a surge protector to attach easily to the center of the mount, so it stays hidden yet easily accessible. The TV can also be shifted left and right on the wall plate for perfect placement, even with off-center studs. Powder-coated steel construction offers strength and durability. Universal mounting pattern fits virtually any 30" – 60" flat-panel TV up to 175 lbs.

Sanus LT25b - $219

• The VisionMount LT25 is a tilting wall mount for 30" – 60" flat-panel TVs. Sanus Systems’ Virtual Axis™ tilting technology provides effortless adjustment of viewing angle without the use of tools. ProSet™ post-installation height and leveling adjustments ensure TVs are always perfectly positioned after hanging. The innovative ClickStand™ feature holds the TV away from wall for easy cable installation and maintenance, then snaps shut to secure the TV to the wall plate. The LT25 features an open wall plate design that provides ample room for cable routing, and ClickFit™ technology allows a surge protector to attach easily to the center of the mount, so it stays hidden yet easily accessible. The TV can also be shifted left and right on the wall plate for perfect placement, even with off-center studs. Extruded aluminum wall plate construction is strong and lightweight, making installation a breeze. Universal mounting pattern fits virtually any 30" – 60" flat-panel TV up to 175 lbs.

Sanus VMPL3b - $249

• The VisionMount VMPL3 is a dual purpose tilting and low profile wall mount for medium to extra large LCD and plasma TVs. Sanus Systems' Virtual Axis™ tilting system provides easy adjustment of viewing angle with just the gentle touch of a finger. Its solid heavy-gauge steel construction offers a sleek, high-tech look while providing strength and durability. The expandable wall plate and TV brackets offer a custom fit and lateral shift ability to allow perfect TV placement, even with off-center wall studs. TV is positioned just 2.5 or 1.25 inches from the wall for a clean, low profile appearance. Universal mounting pattern fits virtually any 27 to 84 inch LCD and plasma TV up to 280 lbs.

Sanus VML10-B1 - $79

• The VisionMount VMT14 Super Slim tilting mount places 26" – 42" TVs just .80" from the wall, yet still allows up to 10° of tilting capability. The VMT14 features fingertip tilt, allowing TV angle adjustments to be made with the touch of a finger. Unlike other ultra-thin mounts on the market, the VMT14 also offers additional exclusive features that make it incredibly easy to install and use. ClickStand™ technology holds the TV away from the wall for easy cable access without having to remove the TV from the mount. Convenient quick-release tabs on the mounting brackets stay hidden but easily pull down to unlock the TV from the wall plate for cable access.

.

Sanus VLL10-B1 - $99

• The VisionMount VLL10 Super Slim low-profile wall mount is designed to emphasize the sleek look of ultra-thin LCD, plasma and LED TVs by placing them just .67" from the wall. The VLL10 features exclusive ClickStand™ technology, which holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. Convenient quick-release tabs on the mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. The VLL10 also allows lateral shift adjustment, allowing the TV to slide left and right on the wall plate so it’s positioned exactly where you want it, even with off-center wall studs. Wall plate mounting holes are designed to accommodate 16" or 24" studs. Universal mounting pattern fits virtually any 32" – 60" flat-panel TV up to 125 lbs.

Sanus LL11 - $119

• The VisionMount LL11 Super Slim mount takes low profile to a new level. Its innovative design emphasizes the sleek look of ultra-thin LCD, plasma and LED TVs by placing them just .55" from the wall.

Sanus VMT14-B1 - $99

• The VisionMount VMT14 Super Slim tilting mount places 26" – 42" TVs just .80" from the wall, yet still allows up to 10° of tilting capability. The VMT14 features fingertip tilt, allowing TV angle adjustments to be made with the touch of a finger. Unlike other ultra-thin mounts on the market, the VMT14 also offers additional exclusive features that make it incredibly easy to install and use. ClickStand™ technology holds the TV away from the wall for easy cable access without having to remove the TV from the mount. Convenient quick-release tabs on the mounting brackets stay hidden but easily pull down to unlock the TV from the wall plate for cable access.

Sanus VMT15-B1 - $129

• The VisionMount VMT15 HDpro™ Super Slim tilting mount places 26" – 46" TVs just .77" from the wall, yet still allows up to 10° of tilting capability. The VMT15 features fingertip tilt, allowing TV angle adjustments to be made with the touch of a finger. Unlike other ultra-thin mounts on the market, the VMT15 also offers additional exclusive features that make it incredibly easy to install and use. ProSet™ post-installation height and leveling adjustments allow the TV to be perfectly positioned after hanging. ClickStand™ technology holds the TV away from the wall for easy cable access without having to remove the TV from the mount.

Sanus VLT14-B1 - $149

• The VisionMount VLT14 Super Slim tilting mount places 37" – 65" TVs just .87" from the wall, yet still allows up to 10° of tilting capability. The VLT14 features fingertip tilt, allowing TV angle adjustments to be made with the touch of a finger. Unlike other ultra-thin mounts on the market, the VLT14 also offers additional exclusive features that make it incredibly easy to install and use. ClickStand™ technology holds the TV away from the wall for easy cable access without having to remove the TV from the mount. Wall plate mounting holes are designed to accommodate 16" or 24" on-center studs.

Sanus VLT15 - $249

• he VisionMount VLT15 Super Slim tilting mount offers the best of both worlds: it places 37" – 65" TVs just .82" from the wall, yet still allows up to 10º of tilting capability.

Sanus LA112-B1 - $899

• The VisionMount LA112 is a motorized full-motion mount that tilts, swivels and extends large flat-panel TVs up to 12" and retracts to just 4.6" from the wall at the touch of a button. A decorative cover surrounds the extension arms to conceal and protect all cables and mounting hardware, and its exterior control panel allows easy maintenance without disturbing the mount. This mount features four pre-programmable settings and a universal remote with TV, DVD and mount control functions. Universal mounting brackets fit virtually any flat-panel TV from 40" – 63" and up to 180 lbs. For hole patterns less than 21.5" (54.6 cm), the VIsionMount MA3A adapter will be needed to complete installation.

Sanus LMT15 - $399

• The VisionMount LMT15 motorized tilting mount for 40" – 60" flat-panel TVs offers up to 13º of fully automated tilt by remote control, so it's easy to find and keep the perfect viewing angles, even in hard-to-reach places. The LMT15 automatically tilts to a pre-set position when the TV is turned on, and can also be positioned as desired with the touch of a remote. When turned off, it returns to its home position against the wall, making it perfect for preventing heat damage on TVs placed above a fireplace. The LMT15 features an open wall plate design to allow flexibility in cable management and wiring. Its ultra-light extruded aluminum frame is easy to install and offers a strength-to-weight ratio and corrosion resistance much greater than steel. Safety sensors stop movement instantly if object interference is detected. Universal mounting brackets fit virtually any flat-panel TV from 40" – 60" and up to 150 lbs.

Sanus VLMF109 - $499

• The VisionMount VLMF109 motorized full-motion mount for 37" – 56" TVs up to 110 lbs lets you find the perfect viewing angle without leaving your seat. It offers ultra-quiet, fully automated extension up to 9" from the wall and up to 120º of swivel with the touch of a button. Its low-profile design retracts to just 2" from the wall for a flush appearance. The easy-to-install VLMF109 can shift left and right after mounting to ensure perfect TV placement, and its open wall plate design allows ample room for cable management.

Sanus SC1Ab - $129

• The VisionMount VMFL1 is a low profile wall mount for small LCD TVs. Its powder-coated steel construction offers a sleek, high-tech look while providing strength and durability. TV is positioned just 0.5 inches from the wall for a clean, low profile appearance. VESA 75 and 100 mounting patterns fit virtually any 13 to 30 inch LCD TV or monitor up to 40 lbs.

Sanus MC1Ab - $169

• The VisionMount MC1A is a full-motion ceiling mount for medium flat-panel TVs. This mount is a great choice for corner placement or when wall mounting is not possible. Sanus Systems’ Virtual Axis 3D™ technology allows mount to tilt and swivel with fluid motion in every direction possible without the use of tools. Quick Connect™ keyholes on faceplate slide onto TV and into place for effortless bracket alignment and easy installation. Includes two VESA-compatible TV brackets to accommodate virtually any 23” to 37” LCD TV or monitor up to 70 lbs: large bracket fits 200 x 200, 200 x 100 and 100 x 100; small bracket fits 100 x 100 and 75 x 75. Features adjustable height for perfect TV positioning and a wire management channel to keep cables concealed and organized.

Sanus VMPR1 Black or Silver- $119

• The VisionMount VMPR1 is a tilt and swivel ceiling mount for projectors up to 50 lbs. Independent adjustment settings make set up and alignment easy, and its quick-release mechanism allows servicing of filters and bulbs without refocusing or realigning. Solid heavy-gauge steel construction adds strength and stability, and hardware-hiding bezels offer a sleek, high-tech look. Versatile mount design is compatible with more than 95% of all DLP and LCD projectors on the market.

Sanus LC1A - $359

• The VisionMount LC1A is a tilt and swivel ceiling mount for large flat-panel TVs. This mount is a great choice for space-saving corner placement or when wall mounting is not an option. Sanus Systems' Virtual Axis technology allows the mount to tilt up and down with the touch of a finger, and a unique wire management channel conceals and routes cables from ceiling to TV. This mount includes ceiling adapter plates for wood joist or solid surface ceilings as well as two pipe lengths for multiple configurations. Universal mounting brackets fit virtually any flat-panel TV from 30" to 55" and up to 175 lbs.
• See below for additional accessories

Sanus LC2A - $499

• The VisionMount LC2A is a dual-sided tilt and swivel ceiling mount for 37" – 56” LCD and plasma TVs. This mount is a great choice when wall mounting is not possible. Its solid heavy-gauge steel construction offers a sleek, high-tech look while providing extreme strength and durability. Sanus Systems’ Virtual Axis™ tilting system provides easy adjustment of viewing angle with just the gentle touch of a finger. Mount can be rotated ±6º after installation to ensure TV is perfectly level, even with off-center wall studs. Ceiling mount accessory kits offer multiple options to adapt to most surfaces. Universal mounting pattern fits virtually any 37" – 56” flat-panel TV. Each mount holds up to 150 lbs. for a total mount capacity of 300 lbs.

Sanus MA4A - $24.95

• The MA4A adapter allows VESA 200 x 200-compatible mounting plates to support TVs with VESA 400 x 300, 400 x 200, 300 x 300, 300 x 200 or 300 x 100 hole patterns. The MA4A attaches easily to Sanus MF110 and VM400 wall mounts, as well as any mount with a Virtual Axis 3D™ interface.

Sanus MA1A - $24.95

• The VisionMount MA1A is a VESA 400 mm x 200 mm and 300 mm x 200 mm adapter for Sanus VM200, VM300, VM400, MF202, MF203, MF209 and MF215 mounts. This adapter allows VESA 200 x 200-compatible mounting plates to support flat-panel TVs that feature a VESA 400 x 200 or 300 x 200 hole pattern.

Sanus VMCA2b - $79

• The VisionMount VMCA2 is an I-beam adapter for Sanus ceiling mounts. This adapter attaches to existing mount to allow easy installation on I-beams.

Sanus VMCA3b - $59

• The VisionMount VMCA3 is a unistrut ceiling adapter for Sanus ceiling mounts. This adapter allows existing mounts to attach to unistruts for easy installation.

Sanus VMCA4b - $99

• The VisionMount VMCA4 is a dual-joist ceiling adapter for Sanus ceiling mounts. This adapter allows existing mount to attach to dual-joists for easy installation.

Sanus VMCA5b - $69

• The VisionMount VMCA5 is a vaulted ceiling adapter for Sanus ceiling mounts. This adapter allows existing mount to attach to angled surfaces for easy installation.

Sanus VMCA6s - $39

• The VisionMount VMCA6 is an NPT column adapter for Sanus ceiling mounts. This adapter allows mount to attach to existing 1.5” NPT pipes for easy installation.

VMCA8b (6"x6") - $69

VMCA7b (8"x8") - $79

• The VisionMount VMCA7 and VMCA8 are 6”x6” and 8"x8" ceiling plate adapters for Sanus ceiling mounts. This adapter attaches to existing mount pipe for easy ceiling installation.

Sanus VMCA9b - $69

• The VisionMount VMCA9 is an offset fixed ceiling plate adapter for Sanus ceiling mounts. This adapter attaches to existing mount pipe for easy ceiling installation.

Sanus VMCA10 - $139

• The VisionMount VMCA10 is an adjustable extension column adapter for Sanus ceiling mounts. This adapter adds 2' to 3' to existing ceiling mount pipe.

Sanus VMCA1b - $39

• The VisionMount VMCA1 is a concrete ceiling adapter for Sanus ceiling mounts. This adapter allows the mount to attach to concrete surfaces for easy installation.

Sanus VMAVb - $44.95

• The VisionMount VMAV is a unique and stylish mounting system for a variety of audio/visual equipment up to 45 lbs. Solid heavy-gauge steel construction provides strength and durability. Its mount arms have pads to cushion, protect and stabilize AV components. Wall mount can be used alone or stacked for traditional DVRs, satellite receivers, surround receivers or DVD players.

Sanus VMCTb - $17

• The VisionMount VMCT is a cable tunnel from Sanus Systems designed to hide and protect cables and wires for a clean, organized appearance. Cable tunnels are easily mounted and snap open for quick access. Perfect for use under flat panel TVs and can also be placed between mounts to create a custom AV solution.

Sanus SSMK1 - $19.95

• The VisionMount SSMK1 is a hardware kit that allows steel wall stud mounting for Sanus VMPL, VMPL2, VMPL3, VMPL50 and VMPL250 flat-panel TV mounts. This kit increases the mounting options of these universal wall mounts for use in commercial applications such as office buildings, warehouses or condominiums. UL listed. Holds up to 175 lbs.

Sanus SD103b - $99

• The VisionMount SD103 is a full-motion desk mount for small monitors up to 20 lbs. This innovative mount can be attached to the back edge or mounted inside the cable opening of desks up to 3" thick without the use of tools. Independent tensions in the arm and head allow for easy adjustment without disturbing the viewing angle, and Sanus’ SmoothLock™ mechanism allows smooth, effortless tilt and swivel motions with the touch of a finger. Features include adjustable height and a wire management channel to keep cables concealed and organized. Solid extruded aluminum and heavy-gauge steel construction is available in black or silver. VESA 75 and 100 mounting patterns fit virtually any flat-panel monitor up to 24".

Sanus MD103 - $139

• The VisionMount MD103 is a full-motion desk mount for monitors up to 35 lbs. This innovative mount can be attached to the back edge or mounted inside the cable opening of desks up to 3 inches thick without the use of tools. Sanus Systems’ Virtual Axis 3D™ technology enables the mount to tilt and swivel with fluid motion in every direction possible, allowing it to move easily from portrait to landscape view. And its adjustment knob maintains tension while the mount moves, so it doesn’t disturb the viewing angle. Features include adjustable height and a wire management channel to keep cables concealed and organized. The MD103 includes small and large VESA monitor brackets to support VESA 75, 100, 200x100 and 200x200 patterns.

Sanus SD115b - $129

• The VisionMount SD115 is a full-motion desk mount for small monitors up to 20 lbs. This innovative mount can be attached to the back edge or mounted inside the cable opening of desks up to 3" thick without the use of tools. Independent tensions in the arm and head allow for effortless adjustment, and an extension arm allows the TV to extend in all directions for easy viewing from nearly every angle. Sanus’ SmoothLock™ mechanism provides smooth, effortless tilt, swivel, pan and extend motions with the touch of a finger. Features include adjustable height and a wire management channel to keep cables concealed and organized. Solid extruded aluminum and heavy-gauge steel construction is available in black or silver. VESA 75 and 100 mounting patterns fit virtually any flat-panel monitor up to 24".

Sanus MD115 - $149

• The VisionMount MD115 is a full-motion desk mount for monitors up to 35 lbs. This innovative mount can be attached to the back edge or mounted inside the cable opening of desks up to 3 inches thick without the use of tools. Sanus Systems’ Virtual Axis 3D™ technology enables the mount to tilt and swivel with fluid motion in every direction possible, allowing it to move easily from portrait to landscape view. Independent tensions in the arm and head provide effortless adjustment, and an extension arm extends the monitor up to 15 inches for easy viewing from nearly every angle. Features include adjustable height and a wire management channel to keep cables concealed and organized. The MD115 includes small and large VESA monitor brackets to support VESA 75, 100, 200x100 and 200x200 patterns.

Sanus VMA201 - $89

• The VisionMount VMA201 soundbar speaker mount easily attaches directly to VisionMount LL22, LT25 and LMT15 wall mounts for an optimal listening experience. This great space-saving solution is easy to install and requires no additional drilling. ProSet™ height macro adjustments raise or lower the speaker relative to the TV, and ProSet™ level micro adjustments allow easy horizontal leveling for perfect speaker positioning. Extruded aluminum and heavy-gauge steel construction is strong and sturdy. Universal design fits most soundbars and center-channel speakers up to 35 lbs.

Sanus LR1Ab - $199

• The VisionMount LR1A recessed in-wall box allows a flat-panel TV to rest flush against the wall, hiding mounting hardware for a “no profile” solution for full-motion mounts. Easily installed by cutting a hole into sheetrock between wood studs. Finger-adjustable Quick Shims™ allow box to be leveled and secured tightly into place. Heavy-gauge steel construction is available in black, silver or paintable white finish and features cutouts for signal and power cables. Supports VisionMount VM400 and LRF118 wall mounts to hold virtually any flat-panel TV from 15” to 50”. When used with the LR1A, VisionMount LRF118 and VM400 mounts have an offset of 4.6" to the left of center.

Sanus LRF118b - $399

• The VisionMount LRF118 is a full-motion wall mount for large flat-panel TVs. This mount is specifically engineered for the LR1A recessed in-wall box and allows a TV to rest nearly flush with the wall, hiding mounting hardware. Sanus Systems' Virtual Axis™ technology provides effortless tilting movement with the touch of a finger. Full motion allows tilt, swivel, pan, and extend motions up to 17” from the wall. Its extruded aluminum and solid heavy-gauge steel construction offers a sleek, high-tech look while providing strength and durability. Universal mounting pattern fits virtually any 30 to 50 inch LCD or plasma TV up to 130 lbs.

Flat Panel Frames - from $899

Mirror Kit - from $799

• VisionMount™ flat-panel TV decorative frames integrate design with technology to blend seamlessly into any room décor. These museum-quality hardwood frames fit most flat-panels and will instantly turn any TV into a work of art. Each frame includes an easy-to-install infrared repeater kit for compatibility with any remote control. An optional optical mirror kit allows the TV to perform as a mirror when the display is off. Available sizes: 32-inch (priced above), 42-inch, and 50-inch.

Sanus WMS3b / s - $49.95

• The Sanus WMS3 is a tilt and swivel wall or ceiling mount for small speakers up to 8 lbs. Its durable nylon construction features three locking knurled pivot points that allow perfect speaker positioning while maximizing strength and stability. Includes single- and double-hole brackets, an extension for ceiling use and nylon covers to hide the adjustment mechanism. Can be used indoors or outdoors.

Sanus WMS2b - $89.95

• The Sanus WMS2 is a tilt and swivel wall mount for speakers up to 15 lbs. Its rigid construction and contemporary style provide unparalleled performance and support. Universal adjustments allow simple positioning of each speaker for optimum sound quality. An attractive cover conceals the mounting hardware.