NAD Stereo Components |
| Integrated Aplifier /Receivers | Pre / Power Amps | Custom Installation Amps | CD Players | Compact Systems | AM/FM Tuner |
NAD Stereo Integrated Amp
NAD C316BEE - $399
- Continuous Power - 2 X 40 Watts into 4 or 8 Ohms, 20Hz – 20kHz at 0.02%THD
- Dynamic Power - 90W into 8 Ohms, 120W into 4 Ohms, 180W into 2 Ohms
- PowerDrive-S™
- 6 Line Level Inputs including 1 Tape Loop
- Front Panel Input for Portable Media Player
- Bass and Treble Controls
- Tone Defeat (Bypass)
- Headphone Output
- System Remote Control also controls NAD CD Players
- Multi-way Speaker Binding Posts
- Gold Plated RCA Jacks
- Toroidal Power Transformer
|
NAD Stereo Integrated Amp
NAD C326BEE - $599
- Continuous Power - 2 x 50 Watts into 4 or 8 ohms, 20Hz – 20kHz at 0.02%THD
- 110W, 160W, 210W, IHF Dynamic power into 8, 4 and 2 ohms, respectively
- PowerDrive amplifier technology
- Distortion Canceling Circuit
- BEE Anti-saturation Clamp
- Headphones socket
- High Current Holmgren Toroidal Power Transformer
- 7 Line inputs, including MP3-type input and two tape in/outs
- All sockets Gold Plated
- Bass and Treble controls with Tone Defeat switch
- Main-amp Input & Pre-amp Output
- NAD Soft Clipping
- IR Input & Output
- Full System Remote control including Stand-by/Off
- 12V Trigger Output
|
NAD Stereo Integrated Amp
NAD C355BEE - $999
- Continuous Power - 80 Watts x 2 into 4 or8 ohms, 20Hz – 20kHz at 0.02%THD
- 140W, 220W, 270W IHF Dynamic power into 8, 4 and 2 ohms, respectively
- PowerDrive™ circuit
- NAD SR 5 Full System Remote control
- Headphone socket
- Front panel Media Player (MP) input for attaching portable Music Player
- Holmgren Toroidal Power transformer
- 7 Line inputs, including two tape in/outs
- All sockets Gold plated
- Tone controls defeat switch
- Main-amp input & 2 pre-amp outputs
- Speaker A + B Output
- Soft Clipping™
- IR Input/Output
- 12 volt trigger output
- RS-232 Interface
- Detachable IEC Power Cable
|
NAD Stereo Integrated Amp
NAD C375BEE - $1599
- 150W x 2 Continuous Power into 4 Ohms and 8 ohms
- 200W, 365W, 500W IHF Dynamic power into 8, 4 and 2 ohms, respectively
- PowerDrive™ circuit
- NAD SR 8 Full System Remote control
- Headphone socket
- Front panel Media Player (MP) input for attaching portable MP3 Player
- Relay Input Switching
- Holmgren Toroidal Power transformer
- 7 Line inputs, including two tape in/outs
- All discrete circuitry
- Class A Voltage Stages (Preamp and Power Amp)
- Distortion Canceling Circuit
- BEE Anti-saturation Clamp
- Short signal path from input to output
- All sockets Gold plated
- Tone controls defeat switch
- Main-amp input & 2 pre-amp outputs
- Speaker A + B outputs and switching
- Soft Clipping™
- IR Input/Output
- 12 volt trigger out
- RS-232 serial port
- Detachable IEC Power Cable
- Optional PP375 MC/MM Phono Module
- <1W Standby Power Consumption
- Free of lead and other environmentally dangerous substances
|
NAD Master Series Stereo Integrated Amp
NAD M3 - $Call 902-434-5511
- Continuous Power - 180 watts X 2, 10Hz - 20kHz, with 0.03THD, both channels driven into 8 or 4 Ohms
- Dynamic power of 280 watts at 8 Ohms, 480 watts at 4 Ohms, and 785 watts at 2 Ohms
- PowerDrive
- Dual stage high current/high voltage power supply
- Dual Mono topology
- Twin NAD Custom-Made "Holmgren" Toroidal transformer
- Ultra precise multi-stage electronic volume control using discreet resistors
- 7 inputs, including 1 balanced XLR
- Tape/Zone 2 output (independent source selection, no volume control)
- Speakers A B with custom 5 way binding posts
- Biamp mode with selectable 40, 60, 80, 100 Hz crossover frequency on Pre Out 1
- Powered subwoofer Crossover
- Main Amp input
- Remote Bass and Treble controls with Spectral Tilt option
- Remote Balance control with 0.5 dB steps
- Selectable Mono, Left, Right, and Stereo options
- RS-232 interface for advanced custom installations
- 12V Trigger for advanced control options, 1 Out
- 3.5mm IR Control jacks, 1 In and 2 Out
- Detachable AC cord
- M3 System Remote Control
- ZR 3 second zone remote
|
NAD Stereo Receiver
NAD C725BEE - $999
- 50W x 2 Continuous Power into 8 ohms
- 110W, 160W, 220W, IHF Dynamic power into 8, 4 and 2 ohms, respectively
- PowerDriveTM
- AM/FM Tuner with 30 station presets
- Multisource Zone 2 with independent line level outputs
- Speaker A and B switching
- SR 8 System Remote control
- ZR 5 Zone Remote
- Front Panel MP Input for attaching portable MP3 Players
- Controls and displays song information with optional IPD 2 Dock for iPod
- Headphones socket
- Relay Input Switching
- Toroidal Power transformer
- 7 Line inputs
- All discrete circuitry utilizing Class A gain modules
- Short signal path from input to output
- All sockets Gold plated
- Tone controls defeat switch
- Main-amp input & pre-amp output
- Subwoofer Output
- Soft ClippingTM
- IR In & Out
- 12 volt trigger output
- RS-232 serial interface connects to advanced control and automation systems
- <1 watt Standby Consumption
|
Integrated Aplifier /Receivers | Pre / Power Amps | Custom Installation Amps | CD Players | Compact Systems | AM/FM Tuner |
NAD Custom Installation Amplifier
NAD CI9060 - $1999
The NAD CI9060 is a radically new 6-channel amplifier designed to bring NAD's famous amplifier performance to a wide variety of custom-installation applications. Designed after its larger sibling,(CI9120) the 9060 offers 6-channels at 80-watts per channel (8-ohms) for the most demanding custom-installation applications. The CI 060 is designed with complex, multi-zone audio systems in mind to drive larger in-wall, on-wall or outdoor speakers with ease. The CI9060 is rack-mountable and offers easy system configuration through our Flex-Pad feature as well as reliability to changing loads of impedance through our Output Management Circuit which insures years of reliable, clean power.
- 80W x 6 Continuous power (8 ohms); all channels driven simultaneously
- Multi-channel power amp for custom installation
- Flex-Pad allows easy system configuration
- Autologic turn on circuit
- Output Management Circuit (OMC) ensures reliability
- Individual input level controls
- EIA rack mount integrated
- Quiet low-pressure cooling system
|
NAD Custom Installation Amplifier
NAD CI9120 - $2999
The NAD CI9120 is a powerful and flexible 12-channel amplifier that delivers superb performance in the most demanding custom-installation applications. The CI9120 is designed with complex, multi-zone audio systems in mind to drive larger in-wall, on-wall or outdoor speakers with ease. The CI9120 is rack-mountable and offers easy system configuration through our Flex-Pad feature as well as reliability to changing loads of impedance through our Output Management Circuit which insures years of reliable, clean power.
- 80W x 12 Continuous power (8 ohms); all channels driven simultaneously
- Multi-channel power amp for custom installation
- Flex-Pad allows easy system configuration
- Autologic turn on circuit
- Output Management Circuit (OMC) ensures reliability
- Individual input level controls
- EIA rack mount integrated
- Quiet low-pressure cooling system
|
Photo Not available
NAD AM / FM Tuner
NAD C420 - $399
The NAD Model C425 builds on the strengths of previous NAD Tuners by offering a quality of reception that is as good as or better than the quality of today’s broadcasts. A new RF Front End has improved sensitivity for cleaner reception in fringe reception areas, and we have lowered noise across the audio spectrum. The rear panel’s IR Input and RS-232 port allow the C425 to be easily integrated with the sophisticated system controllers used in Custom Installation. We have also improved the user interface by adding a 24 position rotary encoder knob to more quickly tune stations or select preset stations. Additionally, all functions are available via the included IR Remote Control.
- RDS PS (Station name) and RT (Radio text)
- 8 Character preset naming capability for AM & non-RDS
- 30 Station random presets (AM or FM)
- VFL display
- Dimmer (3-position)
- Sleep mode
- MOS-FET RF Front End
- RS-232 Interface
- IR Input
- NAD TNR 1 Full Function Remote Control
|
Integrated Aplifier /Receivers | Pre / Power Amps | Custom Installation Amps | CD Players | Compact Systems | AM/FM Tuner |
| 
NAD Stereo Pre-Amp
NAD C165BEE - $1099
The C 165BEE is an all new design representing a lifetime of design experience from NAD’s renowned Director of Advanced Developments, Bjorn Erik Edvardsen. New semiconductors and improved production techniques such as surface mount devices (SMDs) have created opportunities for performance far beyond expectation when compared to previous products in this price range. Compared to its predecessor the C 162, an improved tone control circuit and revised PCB layout has reduced distortion and noise to unprecedented levels when combined with the high signal capacity of the NAD Class A Gain Modules.
- 6 Line Level Inputs
- Phono Input with selectable Moving Coil and
- Moving Magnet sensitivity settings
- 3 position Resistance and Capacitance settings for Phono Input
- 2 Line Level Outputs, one variable from 0dB to -12dB
- Subwoofer Output
- Independent Headphone Amplifier
- Pure Class A Gain Modules
- Sealed Reed Relays for Input Switching
- Heavy Gauge Steel Chassis
- Bass and Treble Controls with Defeat Switch (bypass]
- Gold Plated Sockets
- 12V Trigger Output
- IR In and Out
- Detachable Power Cord
- SR 8 NAD 4 Device System remote Control
- <1 watt Standby Consumption
|
NAD Stereo Power-Amp
NAD C275BEE - $1499
The C 275BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier. These include application of Bjorn Erik Edvardsen's innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. A carefully engineered PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that simply must be heard, to be fully appreciated!
- 150W x 2 Continuous Power into 4 ohms and 8 ohms
- 250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 ohms, respectively
- PowerDrive™ circuit
- Holmgren Toroidal Power transformer
- All discrete circuitry
- Class A Voltage Stages
- Distortion Canceling Circuit
- BEE Anti-saturation Clamp
- Short signal path from input to output
- All sockets Gold plated
- Soft Clipping™
- ATOLogic 12 volt trigger/ signal sensing input
- Detachable IEC Power Cable
- <1W Standby Power Consumption
- Free of lead and other environmentally dangerous substances
|
NAD Phono Pre-Amp
NAD PP2 - $149
- Selectable MM and MC Phono Stage
- External 24 volt Power Supply
- Gold Plated Sockets
- Close Tolerance High Quality Components
- LED Power Indicator
- Signal/Noise ratio:
- RIAA response accuracy:
- A
NAD USB Phono Pre-Amp
NAD PP3 - $199
- Same as the PP2 , plus:
- USB connection to allow digital transfers of your vinyl LPs to your PC
|
Integrated Aplifier /Receivers | Pre / Power Amps | Custom Installation Amps | CD Players | Compact Systems | AM/FM Tuner |
NAD CD Player
NAD C515BEE - $399
- Plays CD, CD-R/W
- Decodes MP3 and WMA files copied to CD-R for up to 10 hours of continuous play
- 24/192 Sigma/Delta D/A converters are chosen for low noise and excellent linearity
- Audio specific OP Amps assure accurate musical sound
- Carefully chosen capacitors and other passive components with close tolerances for critical circuits
- Full function remote control
- Repeat function for 1 song, 1 disc, or A-B repeat
- Program play with direct access from the remote control
- Informative VFD display gives complete information about tracks and time
- Display dimmer
- COAX and Optical digital outputs
- Compact size matches the NAD C 315BEE Amplifier
|
NAD CD Player
NAD C545BEE - $699
- CD, CD-R and CD-RW Compatible
- MP3 and WMA decoding
- NAD CD-8 Full Function Remote Control
- Burr Brown 24 bit Digital to Analogue Converter
- Coaxial Digital Output
- Optical Digital Output
- Low Output Impedance
- Toroid Power supply with Separate Power Regulators for Analog and Digital Sections
- VFL Display with CD text
- Selectable Track,
Time and Repeat
- Repeat Mode for Single Track or Entire CD
- Program Play up to 40 Tracks
- Random Play
- External IR Input
- 12V Trigger Input
- <1 watt Standby consumption
- Detachable AC cord
|
NAD CD Player
NAD C565BEE - $999
- Plays CD, CD-R/RW
- USB Input allows playback from solid state memory devices
- SPDIF Optical Input
- Coax and Optical SPDIF Outputs
- Decodes MP3 and WMA music files
- Displays CD Text and MP3 Meta Data
- Sample Rate Converter upsamples 44.1kHz and 48kHz recordings to 96kHz or 192kHz (selectable)
- Selectable Digital Filter Slopes
- Wolfson 24/192 DACs in Dual Differential configuration
- Toroidal Power Transformer
- Gold Plated Sockets
- IR Input
- IR Input/Output
- 12V Trigger Input
- 12 volt trigger out
- RS-232 Serial Interface Port
- <1W Standby Consumption
- Detachable IEC Power Cable
|
NAD Master Series CD Player
NAD M5 - $call 902-434-5511
- Plays SACD, CD, CD-R, CD-RW
- AES/EBU balanced digital out for PCM sources
- Coax and TosLink PCM digital audio outputs
- Separate 2 channel and 5.1 channel analog outputs
- Balanced 600 Ohm Stereo Outputs
- HDCD, MP3, and WMA decoding
- Bass Management for SACD
- 24 bit 192kHz DACs with DSD mode
- NAD Pure Class A Discrete Gain Modules
- Separate power supplies; switch mode for digital circuits, linear for audio circuits.
- Composite Video Output (switchable On/Off)
- RS-232 port
- IR Input
- 12V Trigger Input
- Detachable AC cord
- M5 Remote Control
|
NAD Compact Stereo System
NAD C715 - $599
- 2 X 20 Watt power into 4/8 Ohms at rated distortion.
- AM/FM radio tuner with 30AM/30FM preset station memory
- DAB tuner (Band III) with 10 presets included for C715DAB (C715DAB model available only in markets that offer DAB service)
- Plays CD, CD-R/RW discs (8mm and 12mm playable)
- CD Repeat Mode (One track, all tracks, Repeat A-B)
- USB Digital Record/Playback function for Memory Stick and MP3 Media Players
- Recording and Playback with selectable choice of MP3 or WMA file types
- 3 Analog Stereo Inputs
- 1 Analog output will send recording signal to a tape recorder
- 1 Digital Optical output will send recording signal to a digital recorder
- Timer/Alarm function with 24 hour clock
- Headphone Output
- Multi-way Speaker Binding posts allow the use of high quality speaker cable
- Subwoofer Output for convenient connection of an optional selfpowered subwoofer
- Bass and Treble Controls
- Full function remote control handset
|
NAD CD/DVD Stereo Receiver
NAD Viso 2 - $999
NAD Viso 5 - $1499.
With the VISO TWO DVD Receiver, NAD now offers the level of performance associated with its highly acclaimed full-size separates in an elegant, compact design. Designed to complement today's advanced video displays, its elegant proportions and fine details make a sophisticated design statement. And unlike most other "all-in-one" systems, the NAD performs like an award winning NAD separate component. We have not made any performance compromises in our quest for convenience and style.
- 2 x 50 Watts, 20Hz-20kHz, with <0.08% THD into 8 Ohms, both channels driven simultaneously (NAD Full Disclosure Power)
- Viso 5 is 4 x 45 watts
- 2 x 60 Watts FTC power
- Plays DVD-V, VCD, SVCD, CD, CD-R, CD-RW, MP-3, J-PEG, WMA, DVD-Audio
- Progressive Scan Video with Component Video Output
- Dolby Virtual Speaker and Dolby Headphone
- Full-size Separate Component performance
- Subwoofer output
- Satellite and VCR inputs
- 1 Component Video input
- OSD available on Component
- output
- HDMI output for DVD Player
- VCR & TV monitor outputs including Component
- 2 digital inputs: 1 RCA; 1 TOS Link
- 1 TOS Link digital output
- IR Input
- RS-232 port for advanced control system interface
- RDS tuner (RDS PS & RDS RT)
- 30 AM and 30 FM presets
- XM Ready
- Data Port for optional IPD 1 dock for iPod®.
- Clock with Timer function
- All RCA sockets gold-plated
- HTR-7, 8 Device Learning
|
|
| Updated:
June 1, 2010
|
 |
 |
|
;)
;)
;)
;)
;)
;)
;)
;){kind=link}